Name: WE Knife WE20015-2 Seer
Brand: WE Knife
SKU: WKWE20015-2
Price: 2138 DKK
Availability: BackOrder
Rating: 10 (2 reviews)

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Knives and Tools Knife Cleaning Mat, rubber

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

productlabel

Work Sharp Multi-Sharpener Ken Onion Edition

WE Knife Baculus, TP-07B tactical pen

legal_agecheck_key

WE Knife Baculus, TP-07A tactical pen

Skerper Paddle Strop STP001, stropping paddle

Skerper paddle strop Viking, rough, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Spyderco Sharpmaker, 204MF

Civivi C20048-1 Key Bit Container Grey Titanium

Civivi C20048-3 Key Bit Container Blue Titanium

Civivi C20048-2 Key Bit Container Bronze Titanium

WE Knife Syrinx TP-04C EDC pen, Black

Skerper Maintenance Oil Pen MA002, 10 ml

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools 550 paracord type III, colour: black eye, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: blue snake, 100 ft (30.48 m)

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools Knife Patch, Padraig Croke design

The **WE Knife Seer WE20015** is a beautiful limited edition pocket knife. Use it for everyday carry or put it in a display case next to your other show pieces.

The blade is made from stainless CPM 20CV steel. This steel retains its sharpness for a really long time, making it perfect for daily use. The handle is made from titanium, and has a deep-carry pocket clip in the same finish as the handle. You open the knife with the flipper, then a solid frame lock locks the blade in place. The satin finish on the blade is a nice detail. It gives the knife a sleek appearance.

**Only 610 pieces of this model were produced! So be quick. Only available while stocks last!**

WE Knife WE20015-2 Seer

colour

WE Knife WE20015-1 Seer

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

zm_series

expectedRestockDate

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Sehr gutes Messer als EDC.
Taugt auch als Arbeitsmesser, allerdings muss man nach ca. 3 Monaten die Lager neu fetten da es anfängt zu quietschen wenn man es öffnet, ist aber relativ einfach, man braucht nur einen TX 8 und ein bisschen Fingerspitzengefühl.
Sonst alles perfekt, kein Klingenspiel und sehr gute Action.


Qualitativ ist das Messer ideal, Design: schön und handlich. Von WE auch nichts Anderes zu erwarten. Top Hersteller - Top Produkt.

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

WE Knife WE20015-2 Seer

WE Knife WE20015-2 Seer

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife WE20015-2 Seer

WE Knife WE20015-2 Seer

WE Knife WE20015-2 Seer

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife WE20015-2 Seer

Relevant topics