Name: WE Knife Curvaceous WE20012-2 Black Titanium, Green Micarta pocket knife, Eric Ochs design
Brand: WE Knife
SKU: WKWE20012-2
Price: 2464.49 DKK
Availability: InStock

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

WE Knife Curvaceous WE20012-3 Black Titanium, Natural G10 pocket knife, Eric Ochs design

legal_agecheck_key

productlabel

Work Sharp Multi-Sharpener Ken Onion Edition

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

Spyderco Sharpmaker, 204MF

WE Knife Baculus, TP-07A tactical pen

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

WE Knife Baculus, TP-07B tactical pen

WE Knife Curvaceous WE20012-1 Grey Titanium, Marble Carbon fibre pocket knife, Eric Ochs design

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Civivi C20048-3 Key Bit Container Blue Titanium

Civivi C20048-1 Key Bit Container Grey Titanium

Civivi C20048-2 Key Bit Container Bronze Titanium

WE Knife Syrinx TP-04A EDC pen, Blue

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 paracord type III Military Spec , colour: Camo Green, 100 ft (30.48 m)

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

The **WE Knife Curvaceous WE20012** is a cool pocket knife, designed by Eric Ochs. It is not difficult to see how the knife got its name. There is almost no straight line in sight. Only wavy, round shapes giving the knife its organic look and feel.

The blade is made from premium CPM 20CV steel and has a persian-style shape. This is a type of blade often used for Persian swords and daggers. Perhaps not the most practical shape, but it looks amazing. WE Knife enhanced the blade with a compound grind. The front of the blade is enhanced with a hollow grind, the end, towards the tip, with a flat grind. The hollow grind improves the cutting capacities of the knife, the flat grind the solidity of the tip. As a result you will get the best of both worlds! You open the knife with the flipper after which a solid framelock locks the blade.

The knife is enhanced with a titanium bolster with decorative grooves and the scales are made from green micarta. The pocket clip is milled from one piece of carbon fibre and nicely follows the shape of the handle.

WE Knife Curvaceous WE20012-2 Black Titanium, Green Micarta pocket knife, Eric Ochs design

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

zm_series

expectedRestockDate

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

WE Knife Curvaceous WE20012-2 Black Titanium, Green Micarta pocket knife, Eric Ochs design

WE Knife Curvaceous WE20012-2 Black Titanium, Green Micarta pocket knife, Eric Ochs design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

WE Knife Curvaceous WE20012-2 Black Titanium, Green Micarta pocket knife, Eric Ochs design

WE Knife Curvaceous WE20012-2 Black Titanium, Green Micarta pocket knife, Eric Ochs design

WE Knife Curvaceous WE20012-2 Black Titanium, Green Micarta pocket knife, Eric Ochs design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

WE Knife Curvaceous WE20012-2 Black Titanium, Green Micarta pocket knife, Eric Ochs design

Relevant topics