Name: Steel Will Modus F25M-14 Grey FRN, D2 blade, pocket knife
Brand: Steel Will
SKU: SWK-F25M-14
Price: 385 DKK
Availability: BackOrder

Work Sharp WSKTS2 Knife & Tool Sharpener MK2

notforsale

not_replaced_in

Knivesandtools Knife Pouch Black, by Maxpedition

Work Sharp Precision Adjust Elite WS09DX066 sharpening system

Skerper Maintenance Oil Pen MA002, 10 ml

Skerper Pocket Strop STP002, stropping paddle

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

Skerper Basic sharpening pen with a diamond steel, SO001

Knivesandtools 550 paracord type III, colour: charcoal grey, 100 ft (30.48 m)

Nano-Oil 10w maintenance oil 8cc/8ml

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Fallkniven Diamond Ceramic Whetstone DC4

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools 25th Anniversary Challenge Coin 2024

Knivesandtools #OneKnifeStand, knife stand

The **Steel Will Modus F25M** is a pocket knife with an appealing design and good materials, for an affordable price. The perfect knife to carry with you every day to open boxes or peel an apple. This is the little brother of the standard Modus.

## Blade and handle of the Steel Will Moduc F25M

The blade is made from D2 steel. This is a tough steel with good sharpness retention. Very good, even! However, do make sure to clean it after peeling an apple: D2 is not completely stainless. You can quickly open the knife with the flipper. It opens the blade accurately, then the blade is locked by a liner lock. This means it will never snap shut when you don't want it to.

The handle is made from FRN. This is a lightweight plastic. Incredibly strong, because it is reinforced with glass fibres. The pocket clip allows you to safely carry it in your pocket. The Steel Will Modus is an outstanding option in its price range.


Steel Will Modus F25M-14 Grey FRN, D2 blade, pocket knife

colour

Steel Will Modus F25M-11 Black FRN, D2 blade, pocket knife

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

legal_agecheck_key

expectedRestockDate

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Steel Will Modus F25M-14 Grey FRN, D2 blade, pocket knife

Steel Will Modus F25M-14 Grey FRN, D2 blade, pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Steel Will Modus F25M-14 Grey FRN, D2 blade, pocket knife

Steel Will Modus F25M-14 Grey FRN, D2 blade, pocket knife

Steel Will Modus F25M-14 Grey FRN, D2 blade, pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Steel Will Modus F25M-14 Grey FRN, D2 blade, pocket knife

Relevant topics