Name: Robert Herder Edwin Vinke's special fish knife walnut wood
Brand: Robert Herder
SKU: RH1210-135-18-0005
Price: 1962.99 DKK
Availability: InStock

Robert Herder maintenance set 920000500

notforsale

not_replaced_in

Robert Herder Edwin Vinke's special sturdy fillet knife 21 cm walnut wood

legal_agecheck_key

Eden chopping board Iroko wood EQP006-3727

Eden vertical magnetic knife strip oak, 50 x 12 cm

Eden vertical magnetic knife strip walnut, 50 x 12 cm

Skerper Professional sharpening set 220/1000/2000/5000, dressing stone + holder

Robert Herder Edwin Vinke's special flexible fillet knife 17 cm walnut wood

Robert Herder Edwin Vinke's special fish knife POM

Robert Herder Edwin Vinke's special flexible fillet knife 13 cm POM

Robert Herder Edwin Vinke's special flexible fillet knife 13 cm walnut wood

Robert Herder Edwin Vinke's special sturdy fillet knife 21 cm POM

Eden magnetic knife holder zebrano wood, 50 x 6 cm

Eden cutting board P012 bamboo, 45 x 30 cm

Robert Herder magnetic knife rack, cherry wood

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Robert Herder knife magnet, walnut wood

Skerper Basic sharpening set 180/600/1000/3000 with diamond sharpening steel, SH006

Robert Herder Free Form Cutting board 9401245220000 apple wood, cutting board 25 x 20 x 1.9 cm

Eden Pankiri Japanese bread knife 27 cm

Material: stainless steel/ walnut wood
Blade length: 13.5 cm
Weight: 143 grams 

 This **Robert Herder Edwin Vinke's special fish knife** has a high, stiff blade and a strong spine that fits perfectly in hand. It allows you to move the blade as if it were an extension of your hand. The rounded tip allows you to cut accurately along the grain. The blade is thin and sharp from the tip, but a bit thicker at the back, so you can cleave fish by striking the back of the knife.


The blade is made from stainless steel, which is nice and easy to maintain. The handle is made from walnut wood. This dark wood has a fine structure, and usually a good pattern too. This knife is not dishwasher-safe.


## Origin of Edwin Vinke fish knives


 Edwin Vinke is the chef of the two Michelin star restaurant De Kromme Watergang, which serves many different kinds of fish. Edwin fillets the fish himself. But he found that the knives he was using had a lot of room for improvement. So he sat down with Robert Herder's granddaughter. 


The knives draw inspiration from Japanese knives. However, the Japanese tend to use somewhat larger knives. The design of these knives is smaller because smaller fish are served in Europe. In these knives, Robert Herder and Edwin Vinke have brought the Japanese knives down into a smaller form. The series has been tinkered with for over a year, but the result is impressive!



Robert Herder Edwin Vinke's special fish knife walnut wood

handle_material

colour

handedness

blade_finish

blade_feature

kitchen_steel

knife_edge_type

sharpening_type

sharpening_angle

delivered_as_a_set

kitchen_knife_type

value_number_of_knives

value_weight

value_blade_height

value_blade_length

value_overall_length

value_blade_thickness

brand

series

expectedRestockDate

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

Measured from the tip of the blade to the back of the handle

Total length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

dishwasher_safe

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Way of sharpening

type_of_handle

value_total_sharpening_angle

This is the total sharpening angle, so the sharpening angles of both sides of the blade combined. For a knife with a one-sided grind this equals a single sharpening angle.

Total sharpening angle

Features & functions

For the number of knives in the knife sets we stick to the information supplied by the manufacturer. Some brands consider the block to be part of the set, others don't. 

Robert Herder Edwin Vinke's special fish knife walnut wood

Robert Herder Edwin Vinke's special fish knife walnut wood

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Robert Herder Edwin Vinke's special fish knife walnut wood

Robert Herder Edwin Vinke's special fish knife walnut wood

Robert Herder Edwin Vinke's special fish knife walnut wood

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Robert Herder Edwin Vinke's special fish knife walnut wood

Relevant topics