Name: Amare Knives Paragon, stonewashed blade, milled G10, pocket knife
Brand: Amare Knives
SKU: AS-PA-SG10
Price: 728 DKK
Availability: InStock

Work Sharp Angle Set knife sharpener, WSBCHAGS

notforsale

not_replaced_in

Knivesandtools 550 Paracord Type III Military Spec RG1164H, black, 100 ft (30.48 m)

Knivesandtools EDC pouch

Work Sharp WSKTS2 Knife & Tool Sharpener MK2

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 paracord type III, fish and fire paracord, 100 ft (30.48 m)

Nano-Oil 10w maintenance oil 8cc/8ml

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Fallkniven Diamond Ceramic Whetstone DC4

Ballistol maintenance oil, 50 ml

productlabel

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #OneKnifeStand, knife stand

Knivesandtools #EveryDayCloth, micro-fibre cloth

Knivesandtools Logo Pin

Handle/blade: stainless steel and G10/N690
Blade length: 8.3 cm
Weight: 125 grams

The **Amare Knives Paragon** is a unique pocket knife, designed by the German knife maker Ulrich Hennicke and made by Real Steel knives. At first glance the Paragon looks like a fairly ordinary pocket knife. This couldn't be more from the truth The Paragon has been enhanced with the new patented and very innovative A-joint locking mechanism! 

 The A-joint mechanism works like a slipjoint. It is located in the front part of the handle underneath the carbon fibre and can only be seen when you take the knife apart. The A-joint mechanism is shaped like the letter V of which the two ends press down on the blade. Both ends have been enhanced with a semi-circular cut-out. At the part where the blade rotates around the pivot a round rod has been placed on the outside of the blade. When opened and when closed it falls into one of the cut-outs of the A-joint mechanism. Because the sping that locks the knife when opened applies more pressure than the spring that locks the knife when closed, the knife is easier to open than close. Incredibly innovative! Another great advantage is that the A-joint mechanism is completely hidden inside the handle. As such no dirt or dust can get caught in the locking mechanism. 

 Amare knives chose N690 steel for the blade. A great type of steel and excellent for a pocket knife. You can easily open the Pargon with the tight nailnick which is located at the back of the blade. You can easily reach it because of the finger groove at the deep carry pocket clip. All in all the Amare Knives paragon is a stunning and compact pocket knife. Ulrich Hennicke designed the Paragon keeping the strict European knife laws in mind that forbid a locking-knife in many places. Because of the slipjoint mechanism the Paragorn can be worn legally in many places. 



Amare Knives Paragon, stonewashed blade, milled G10, pocket knife

handle_material

Amare Knives Paragon, satin blade, carbon fibre, pocket knife

colour

handedness

blade_finish

opening_system

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

expectedRestockDate

legal_agecheck_key

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Amare Knives Paragon, stonewashed blade, milled G10, pocket knife

Amare Knives Paragon, stonewashed blade, milled G10, pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Amare Knives Paragon, stonewashed blade, milled G10, pocket knife

Amare Knives Paragon, stonewashed blade, milled G10, pocket knife

Amare Knives Paragon, stonewashed blade, milled G10, pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Amare Knives Paragon, stonewashed blade, milled G10, pocket knife

Relevant topics