Name: Zero Tolerance 0762 pocket knife
Brand: Zero Tolerance
SKU: ZT0762
Price: 3087 DKK
Availability: BackOrder

The **Zero Tolerance 0762** is a cool pocket knife that will look amazing in your pocket and your showcase. A top-quality knife enhanced with a couple cool, technical highlights.

Zero Tolerance, for instance, uses an interesting combination of titanium and carbon fibre. The bright-blue parts of the handle are all made from titanium. So the liners you see through the carbon fibre, the lock and the pocket clip. The liners are kept as small as possible, but do add solidity to the frame.

Zero Tolerance's flagship is their Sub-Framelock. A combination between an insert linerlock and a framelock. As such the line of the lockbar nicely follows the design of the handle. While, at the same time, you don't have to compromise when it comes to solidity. A great invention, exclusively used by Zero Tolerance and Kershaw. Of course this Sub-Framelock is enhanced with a steel insert. This insert ensures that the lock will function perfectly for years to come.

Another new feature is the **TDS**: *Tuned Detent System*. While (sub)framelock flipper pocket knives usually rely on the detent ball in the lockbar to ensure that the blade stays closed, for the TDS a second 'arm' was added to the frame, with a detent ball. As such it doesn't matter if your fingers hit the lockbar: it will always nicely open. Zero Tolerance also enables you to fine-tune the resistance of the lock, and the resistance you feel when opening the knife. Hence the name: **Tuned** Detent System.

The blade is made from CPM 20CV-steel. An extremely wear resistant type of steel that retains its sharpness well. 20CV is also stainless. A great type of steel for EDC use. As such you rarely have to sharpen the knife.

All in all the Zero Tolerance 762 is the embodiment of the term 'Beauty and Brains', but as a pocket knife. Beautiful, good, practical. All combined. The complete package.

Zero Tolerance 0762 pocket knife

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

legal_agecheck_key

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Zero Tolerance 0762 pocket knife